We accept PayPal for Buyer Protection and Peace of Mind for You.

  • Hotline - Fieldmate Electric Fence Fault Finder - Buy Online SPR Centre UK
  • Hotline - Fieldmate Electric Fence Fault Finder - Buy Online SPR Centre UK
  • Hotline - Fieldmate Electric Fence Fault Finder - Buy Online SPR Centre UK
  • Hotline - Fieldmate Electric Fence Fault Finder - Buy Online SPR Centre UK
  • Hotline - Fieldmate Electric Fence Fault Finder - Buy Online SPR Centre UK
  • Hotline - Fieldmate Electric Fence Fault Finder - Buy Online SPR Centre UK
  • Hotline - Fieldmate Electric Fence Fault Finder - Buy Online SPR Centre UK
  • Hotline - Fieldmate Electric Fence Fault Finder - Buy Online SPR Centre UK
  • Hotline - Fieldmate Electric Fence Fault Finder - Buy Online SPR Centre UK
1 11

Hotline

Hotline - Fieldmate Electric Fence Fault Finder

Hotline - Fieldmate Electric Fence Fault Finder

£67.50 GBP
£67.50 GBP
*SPECIAL OFFER!* Sold out
Tax included. Shipping calculated at checkout.
Product Code:

Voltage tester and directional fault finder.

The Hotline Fieldmate Electric Fence Fault Finder has been expertly crafted to swiftly and precisely loctae faults in your electric fence line, saving you valuable time and effort. Just place the contact plat on the fence line and th horizontal LED array will indicate the directionand magnitude of the fault. An electric fence directional fault finder is an invaluable tool for maintaining and troubleshooting electric fencing systems. This compact and rugged device is designed to quickly and accurately pinpoint the location of faults or breaks in the fence line, saving you time and effort. Simply place the contact plate of the fault finder on the fence and follow the directional indicators, which will guide you straight to the issue. Whether you're dealing with a short circuit, broken wire, or other common fence problems, the Hotline Fieldmate Electric Fence Fault Finder will streamline the process of identifying and repairing faults. Designed in the UK, combining cutting-edge technology with a rugged, user-friendly design the Fieldmate Electric Fence Fault Finder is ideal for both professionals and enthusiasts. With over a decade of experience in the agricultural sector, Fieldmate's technical team has developed a superior product that offers quick and accurate voltage readings and directional fault detection. Their commitment to innovation and quality has resulted in a fault finder that is both premium in build, and competitively priced.

Please Note: This product is not effective with electric netting fences.

*For detailed instructions see the tab below. Full instructions are also included with each unit.

View full details

Features

Key Features:

✔ Directional Fault Detection: Identifies the direction of faults over 4kV, providing precise troubleshooting.

✔ Advanced Voltage Testing: Measures from 0kV to 10kV, suitable for various electric fencing applications.

✔ Rugged and Durable Design: Water and impact-resistant case constructed from premium materials.

✔ Pocket-Sized Convenience: Weighing just 170 grams, it's easy to carry and handle, perfect for on-the-go use.

✔ User-Friendly Interface: Simple, one-touch operation with no need for grounding; clear voltage readings and fault direction indicated by bright LEDs.

✔ Designed in the UK: Developed by a team with extensive experience in the agricultural sector, ensuring top-quality performance and reliability.

Instructions / Feeding Guide

Instructions:

Step 1: Preparation

• Your device comes with batteries pre-installed. Simply remove any packaging and you're ready to go.

• Familiarize yourself with the device's components: contact plate, indicator lights, and power button.

Step 2: Power On

• Press the central "on" button once to turn the device on.

• All indicator lights will illuminate briefly on the first press.

• Check that the Battery indicator light remains illuminated; this will show that the device is functioning properly.

• The device will remain powered on for 30 seconds this is inducated by the illuminated battery light.

• When the battery light is no longer illuminated, the “on” button will need to be re-pressed to re-power the device.

Step 3: Identifying Faults

• Hold the fault finder in your hand with the contact plate facing towards you.

• Touch the contact plate to the wire or tape of the electric fence.

• Observe the indicator lights. The direction of the fault will be indicated by the corresponding light.

Note:
The directional arrow will continue to illuminate in the direction of the fault until you pass the fault. If the directional arrow stops illuminating or changes direction, this means you have passed the fault.

• If the left light illuminates, the fault is to the left of the contact point.

• If the right light illuminates, the fault is to the right of the contact point.

Step 4: Repair the Fault

• Once you've identified the general area of the fault, visually inspect the fence for broken wires, loose connections, or vegetation touching the wire.

• Repair the fault as necessary.

Replacing the Batteries:

• Remove the two screws on the back of the device, placing them in a safe place as these will need to be re-installed once the battery has been replaced.

• Open the Battery door and remove the old Battery. Check that the battery slots are clean and free from debris.

• Install the new battery, following the + / - indicators shown on the PCB.

• Replace the battery door.

• Re-Insert the screws that you previously removed.

• Tighten the screws until they sit flush with the battery door (be careful not to overtighten).

• Test the device by pressing the central "on" button once.

Important Notes:

• This device does not require grounding for operation.

• If the device measures that your fence is outputting 4,000 kV or above, it will deem the fence as healthy and will not indicate a directional fault.

• Always handle the fault finder with care to avoid damage to the contact plate or internal components.

• Keep the device away from water and moisture to prevent malfunction.

• Replace batteries as needed to maintain optimal performance.

Storage:
Store the fault finder in a dry, safe place away from moisture and extreme temperatures.

Warning:
Do not attempt to disassemble or modify the device. This could result in damage or injury. Keep the fault finder out of reach of children and pets.

Ingredients / Materials

Materials: Water and impact-resistant premium materials.

Product Specifications

Specifications:

• Voltage Range: 0Kv - 10kV
• Fault Detection Threshold: Effective over 4kV
• Battery Type: 9V
• Weight: 170 grams
• Product Code: HL11509
• Barcode: 5021385011509

About the Manufacturer / Vendor

Hotline
Hotline Electric Fencing, or AEC Electric Fencing as it was originally named, have been a trusted name in the industry since their establishment in Newton Abbot, Devon in 1968. Hotline were delighted to have recently celebrated their 50th anniversary of manufacturing experience. Throughout the years, their product range has grown significantly to encompass a wide range of high quality, British-made products. In 2007 Hotline proudly became part of the horizont group - this partnership has allowed them to expand their product range as well as allowing them to share and combine their knowledge and expertise in order to provide the highest level of quality, innovation and service to their valued customers.

Shipping Rates

For all orders placed on our website, delivery is available to the UK only.
All orders Monday-Thursday will be processed and Despatched the folowing working day (e.g. orders placed on Monday will be sent Tuesday etc.)
Orders sent Friday-Sunday will be processed and Despatched on the following Monday.
All Shipping Rates are calculated by parcel weight (total combined order).
To view the shipping rates table Click Here